Locking parameters to prevent changes |625
Locking parameters to prevent changes
In various pages, next to some parameters, you can find a lock ( ) icon.
All these locks are collected in the Global > General Controls > Lock pages
for easy access.
Locking the Tuning parameters
1 Go to the Global > General Controls > Lock > Tuning page.
2 Select/deselect the desired locks.
Tuning lock Meaning
Master Transpose Prevents Master Transpose from changing when choosing a
Performance, Style or SongBook Entry. It also prevents transpos-
ing when loading a Standard MIDI File created by Havian 30 or an
instrument of the Korg Pa-Series.
Sub Scale/Quarter
Tone
Prevents the Sub-Scale or Quarter Tone value from changing
when choosing a Performance, STS or SongBook Entry.
SubScale/Quarter
Tone from STS
Prevents the Sub-Scale or Quarter Tone value from changing
when choosing an STS
Auto Octave Depending on the status of this lock, the Upper Sounds can be
automatically transposed when turning the SPLIT on and off.
• If locked, turning the SPLIT on or off will not cause Upper Sounds
transposition.
• If unlocked, when turning the SPLIT button off (Full keyboard
mode) the Upper Sound’s Octave Transpose will be automati-
cally set to “0”. When turning the SPLIT button on (Split keyboard
mode) the Upper Sound’s Octave Transpose will be automatically
set to “-1”.
To Next Page
Loading...
Need help?
General
