412| Effects for the MIDI Sounds
EQ and Filters (EQ/Filter)
6: St.Parametric4EQ (Stereo Parametric 4-Band EQ)
This is a stereo 4-band parametric equalizer. You can select peaking type
or shelving type for Band 1 and 4. The gain of Band 2 can be controlled by
dynamic modulation.
Left
Right
FX Amt
FX Amt
Stereo In - Stereo Out
Band1 Band2 Band3 Band4
PEQ PEQ PEQ PEQ
LEQ
LEQ
HEQ
HEQ
PEQ PEQ PEQ PEQ
Trim
Trim
D
-mod
a Trim 0…10 0 Sets the input level
b Band1 Type Peaking,
Shelving-Low
Selects the type of Band 1
c Band4 Type Peaking,
Shelving-High
Selects the type of Band 4
d Band2 Dynamic Gain
Src
Of f…Tempo Selects the modulation source of the
Band 2 gain
Amt [dB] –18.0…+18.0 Sets the modulation amount of Band 2
gain
e Band1 Cutoff [Hz] 2 0…1.0 0 k Sets the center frequency of Band 1
Q 0.5…10.0 Sets the bandwidth of Band 1
Gain [dB] –18.0…+18.0 Sets the gain of Band 1
f Band2 Cutoff [Hz] 50…10.00k Sets the center frequency of Band 2
Q 0.5…10.0 Sets the bandwidth of Band 2
Gain [dB] –18.0…+18.0 Sets the gain of Band 2
g Band3 Cutoff [Hz] 300…10.00k Sets the center frequency of Band 3
Q 0.5…10.0 Sets the bandwidth of Band 3
Gain [dB] –18.0…+18.0 Sets the gain of Band 3
To Next Page
Loading...
Need help?
General
