Programming the Joystick |637
Assigning function to the Joystick
The left/right (X) movement of the joystick usually controls Pitch Bend.
It can however controls a Sound parameter, depending on the Sound pro-
gramming.
The up movement (Y+) is usually Modulation, and sometimes a different
Sound parameter, depending on the Sound programming. The down move-
ment (Y-) can be assigned to various controls, or isn’t active.
Assigning Sound parameters to the joystick can be done in Sound Edit.
Setting the Pitch Bend range
Pitch Bend range is defined for each Sound set, and can change with differ-
ent Performances, STSs and SongBook Entries.
1 Go to the Mixer/Tuning > Tuning page.
2 Use the PB Sensitivity knobs to set the Pitch Bend range for each Sound.
PB Sensitivity Meaning
1 … 12 Maximum up/down pitch bend range (in semitones). 12 = ±1 oc-
tave.
0 No pitch bend allowed.
3 Write the changes to a Sound set.
To Next Page
Loading...
Need help?
General
