560| Effects for the MIDI Sounds
e [P]Manual 0…10 0 Sets the frequency to which the ef-
fect is applied
Depth 0…10 0 Sets the depth of LFO modulation
Resonance –100…+100 Sets the resonance amount
f [P]Phaser Wet/Dry -Wet, -1:99…
Dry…99:1, Wet
Sets the phaser effect balance
Src Off…Tempo Selects the phaser’s Wet/Dry mod-
ulation source
Amt –100…+100 Sets the phaser’s Wet/Dry modula-
tion amount
g [P]Output Mode Normal,
Wet Invert
Selects the phaser output mode
h Routing
Limiter › Phaser,
Phaser › Limiter
Switches the order of the limiter
and phaser
i Wet/Dry Dry, 1:99…99:1,
Wet
Balance between the wet and dry
signal
Src Off…Tempo See DMS (Dynamic Modulation
Source)
Amt –100…+100 Amount of modulation source
93: Limiter - Mt.Delay (Limiter - Multitap Delay)
This effect combines a mono limiter and a multitap delay. You can change
the order of the effects.
Left
Right
FX Amt
FX Amt
FX Amt = 100: Mono In - Mono Out / FX Amt = 0: Stereo In - Stereo Out
+
Routing
Multitap Delay
Feedback
High Damp
Delay
(2)
(1)
Mt.Dly FX Amt
Limiter
Limiter
Gain Adjust
Envelope - Control
To Next Page
Loading...
Need help?
General
