Recording a Style in Realtime Record |207
Recording a Style in Realtime Record
After having chosen the Style Element (Record 1 > E) and Chord Variation
(Record 1 > CV) to record, go on recording.
Using the metronome
▪ Press the METRONOME ( ) button to turn the metronome on or off while
recording.
Realtime recording
Select the track to record
▪ While in the Record 1 or Record 2/Cue page, touch the track to record to
select it. The Record icon ( ) will appear.
Practice before recording
1 Mute the track to record, by repeatedly touching its status icon in the mixer
channel.
2 Press the START/STOP button to let any previously recorded track play
back, and practice on the keyboard.
3 When you have finished practicing, press START/STOP to stop the arranger.
4 Set the track to record again, by repeatedly touching its status icon.
Record
1 Press the START/STOP button to begin recording.
A 1-measure precount will play before the recording actually begins. When
it begins, record freely.
While recording, the track’s Keyboard Range is ignored, and notes can be
recorded and played back over the full keyboard range. The Local Control
parameter is also automatically set to On, to allow playing on the keyboard.
The Damper pedal (or any other footswitch) is disabled. Volume/Expression-
type pedals can be used.
2 Recording will happen in cycle. The pattern will last for some measures, ac-
cording to the Rec Length value, then start again from the beginning.
To Next Page
Loading...
Need help?
General
