Connecting the damper pedal |19
02 Setting up the
accessories
Connecting the damper pedal
Connecting the DS2H damper pedal
Use the PEDAL connector to connect the supplied Korg DS2H damper pedal.
This pedal supports all the nuances of half-pedaling on some Grand Piano
sounds. You can experiment how it works by gradually pressing it down, and
gradually releasing it, while playing one of the Grand Piano RX Sounds.
As an alternative, you can connect any other footswitch pedal like the (op-
tional) Korg PS1, PS3 or DS1H, or a continuous pedal like the (optional) Korg
XVP-10 Volume pedal or EXP-2 Expression pedal.
By default, this connector will work as a Damper (Sustain) pedal. If you want
to change the assigned function, or you need to change the pedal’s polarity
and calibrate it, go to the Global > Controllers > Foot Controllers page.
What if the pedal does not behave correctly?
From time to time, you might want to recalibrate the pedal. See how to do in
Calibrating the pedal and setting its polarity on page 643.
To Next Page
Loading...
Need help?
General
