Turning the instrument on |23
03 Powering
Turning the instrument on
Connecting the power adapter
Plug the supplied power adapter AC cable into a wall power socket, and the
DC power adapter cable into the DC IN 15V connector on the back of the
instrument.
To avoid cable jamming, fix the power cable to the dedicated cable holder.
When the cable is connected, the instrument is in standby.
Warning: When the instrument is in standby, it is still connected to the power line.
Accessing the inside of the instrument can be dangerous. To completely disconnect
the instrument from the power, unplug the power plug from the power socket on the
wall.
Turning the power on or off
Turn the instrument on
▪ Press the POWER ( ) button to turn the instrument on (that is, ‘exit from
standby’). After you turn the instrument on, a welcome screen will be shown
for a few seconds, then the main page of the Style Play mode will appear.
Turn the instrument off (standby)
▪ Keep the POWER ( ) button pressed for about one second, then release
it when the screen appears dimmed. The shutdown procedure will begin and
last for a few seconds. Please do not disconnect the power cable during this
procedure.
To Next Page
Loading...
Need help?
General
