602| Effects for the MIDI Sounds
h Input Level Dmod [%] –100…+100 Sets the modulation amount of the in-
put level
Src Off…Tempo Selects the modulation source for the
input level
i Spread –50…+50 Sets the width of the stereo image of
the effect sound
j Wet/Dry Dry,
1:99…99:1,
Wet
Balance between the wet and dry sig-
nal
Src Off…Tempo See DMS (Dynamic Modulation
Source)
Amt –100…+100 Amount of modulation source
122: Hold Delay
This effect records the input signal and plays it back repeatedly. You can
control the start of recording and reset via a modulation source. Easy to use
for real-time performances.
Left
Right
FX Amt
FX Amt
FX Amt = 100: Mono In - Stereo Out / FX Amt = 0: Stereo In - Stereo Out
Pan
Delay
D
-mod
D
-mod
Loop Time: Auto/ ...5400ms
+
Tempo
BPM
BPM
Base Note x Times
REC Control
RST Control
a Loop Time [msec] Auto, 1…10800 Sets Automatic loop time setup mode
or species loop time
b Loop BPM Sync Off, On Species whether delay time is set in
milliseconds, or as a note value rela-
tive to tempo
To Next Page
Loading...
Need help?
General
