Quick settings using MIDI Presets |669
You will use the supplied MIDI Presets in the following cases:
MIDI Preset Use
Default Generic settings, good for most situations
Master Kbd When connecting to an external master keyboard
Player When using an external sound generator (an expander or a virtual
instrument)
External Sequencer When slaving Havian 30 to an external sequencer (for example, a
software running on a computer)
Tablet When connecting to a tablet
Editing the MIDI Presets
Editing a MIDI Preset
1 Choose a MIDI Preset containing programming similar to what you want to
achieve.
2 While in the Global > MIDI pages, edit the various parameters.
MIDI Presets can be considered as a starting point that can be freely tweaked.
Once you have selected the most appropriate MIDI Preset for the connection
to be made, you can modify the parameters as needed.
The parameters that will be saved to a MIDI Preset are the ones shown in the
above table.
Saving a MIDI Preset
Open the Write Midi Preset dialog
1 Go to the any page of the Global > MIDI section.
To Next Page
Loading...
Need help?
General
