70| Playing the Styles
Playing back a Chord Sequence
You can play back the Chord Sequence in memory. The chords driving the
automatic accompaniment will be performed by the recorded sequence.
Play the recorded Chord Sequence
1 Press the CHORD SEQUENCER > PLAY/STOP ( ) buttons together to
start playback.
The indicators of the two buttons will start flashing. The Chord Sequence
will be played back in loop starting from the next measure. Recorded chords
will be sent to the arranger, and the Accompaniment will play following the
recorded chords.
2 Play your solo part, while the Chord Sequence plays the chords for you.
During Chord Sequence looping, you can freely select any Fill or Variation,
as if you where playing chords with your hands.
3 Press the CHORD SEQUENCER > PLAY/STOP ( ) buttons together to
stop playback.
The Chord Sequence will remain in memory until you record a new Chord
Sequence, or you turn the instrument off.
To Next Page
Loading...
Need help?
General
