542| Effects for the MIDI Sounds
80: P4EQ - Cho/Flng (Parametric 4-Band EQ - Chorus/Flanger)
This effect combines a mono four-band parametric equalizer and a chorus/
flanger.
Left
Right
FX Amt
FX Amt = 100: Mono In - Stereo Out / FX Amt = 0: Stereo In - Stereo Out
Trim
+
Parametric 4Band EQ
Chorus/Flanger
FX Amt
Chorus/Flanger
Feedback
LFO: Tri / Sine
Cho/Flng FX Amt
Normal
Wet Invert
Output Mode
+
–
P4EQ
a [E]Trim 0…10 0 Sets the parametric EQ input level
b [E]B1 Cutoff [Hz] 20…1. 0 0 k Sets the center frequency of Band 1
Q 0.5…10.0 Sets the bandwidth of Band 1
Gain [dB] –18…+18 Sets the gain of Band 1
c [E]B2 Cutoff [Hz] 50…5.00k Sets the center frequency of Band 2
Q 0.5…10.0 Sets the bandwidth of Band 2
Gain [dB] –18…+18 Sets the gain of Band 2
d [E]B3 Cutoff [Hz] 300…10.00k Sets the center frequency of Band 3
Q 0.5…10.0 Sets the bandwidth of Band 3
Gain [dB] –18…+18 Sets the gain of Band 3
e [E]B4 Cutoff [Hz] 500…20.00k Sets the center frequency of Band 4
Q 0.5…10.0 Sets the bandwidth of Band 4
Gain [dB] –18…+18 Sets the gain of Band 4
CHORUS/FLANGER
f [F]LFO
Frequency [Hz]
0.02…20.00 Sets the speed of the LFO
LFO Waveform Triangle, Sine Selects the LFO Waveform
g [F]Delay Time
[msec]
0.0…1350.0 Sets the delay time
Depth 0…10 0 Sets the depth of LFO modulation
Feedback –100…+100 Sets the feedback amount
To Next Page
Loading...
Need help?
General
