372| Editing the Sounds
Programming amplitude and pan
You can program the amplitude and pan of each oscillator. Amplitude is the
volume of the oscillators. Pan is the position of the oscillators in the stereo
panorama. With amplitide envelope you can make the sound volume vary
over time.
Setting the basic amplitude and pan values
You can set the basic volume and pan values of the selected oscillator.
▪ Go to the Sound > Amp > Amp Level/Pan page.
Setting the amplitude’s basic level
▪ Use the Amp Level parameter (0…127) to set the volume of the selected
oscillator.
The volume of a Sound can be controlled by CC#7 (Volume) and #11
(Expression). The resulting level is determined by multiplying the values of
CC#7 and #11. The Global MIDI channel is used for control.
To Next Page
Loading...
Need help?
General
