Mixing the Keyboard Sounds |139
Turn a channel on (Play)
Touch the Mute icon ( ) in the mixer channel corresponding to the Sound
to play ( ).
Soloing a Sound
You can listen to a single Sound in solo, to understand how it sounds out of
the mix.
Solo a Sound
▪ While the Volume pane is shown, keep the SHIFT button pressed, and touch
the mixer channel that you want to listen in solo.
In any page where it appears, you can touch the mixer channel correspond-
ing to the Sound to isolate.
When this function is activated, the ‘Solo’ warning will flash on the page
header.
Solo a Sound via menu command
As an alternative, you can solo a Sound using a menu command.
1 While in any page where the name of the Sound or the mixer channel cor-
responding to the Sound to listen in solo appears, touch it to select it.
2 Choose the Solo Track command from the page menu.
Deactivate Solo
Do one of the following:
▪ While in any page where the mixer channels appear, keep the SHIFT button
pressed, and touch the mixer channel that is currently in solo.
▪ Choose the Solo Track command from the page menu to deselect it.
To Next Page
Loading...
Need help?
General
