The Chord Sequencer |69
The Chord Sequencer
Recording a Chord Sequence
You can record a Chord Sequence, that will remain in memory until you turn
the instrument off.
Record a Chord Sequence
1 Press the START/STOP button to start the Accompaniment.
2 Press the CHORD SEQUENCER > RECORD ( ) buttons together to start
recording.
3 Start playing your Chord Sequence at the beginning of the next measure.
While recording, you will see a red icon flashing in the display.
4 When the Chord Sequence is done, press the CHORD SEQUENCER > RECORD
( ) buttons together to stop recording.
If you want the Chord Sequence playback to start immediately, without any
gap between recording an playing back, do not stop recording as described
in this step. Instead, start it immediately as explained below.
To Next Page
Loading...
Need help?
General
