Master Transpose |649
Master Transpose and Scale
You can define the relation between the Scale and the Master Transpose.
1 Go to the Global > Tuning > Transpose Control page.
2 Use the Scale and Transpose position pop-up menu to choose where trans-
position will apply in relation to the Scale.
Transpose position Meaning
Post-KB/Pre-Scale When this option is selected, notes will be transposed immediate-
ly after they leave the keyboard. The Scale will be applied to the
transposed notes. For example, if you altered an E, and then set
the Master Transpose to +1, the E key will play F, and the altered
key will be E (that will play an altered E).
Scale
Tone
generator
Transpose
Post-KB & Scale When this option is selected, all notes are transposed immediately
before they enter the internal tone generator, or are sent to the
USB DEVICE port, but after the Scale. For example, if you altered
an E, and set the Master Transpose to +1, the altered key will still
be E (that will play an altered F).
Scale
Tone
generator
Transpose
To Next Page
Loading...
Need help?
General
