Modulation and Pitch Shift (Mod./P.Shift) |485
46: St. Env. Tremolo (Stereo Envelope Tremolo)
This effect uses the input signal level to modulate a stereo tremolo (LFO
volume modulation). For instance, you can create a tremolo effect that be-
comes deeper and faster as the input gets more quiet.
Left
Right
FX Amt
FX Amt
Stereo In - Stereo Out
LFO Phase
LFO Shape
Envelope Sens
+
Envelope
LFO: Tri/Sin/Vintage
Envelope Shape
Tremolo
Tremolo
a Envelope Sens 0…10 0 Sets the envelope’s sensitivity to the input
signal
Envelope Shape –100…+100 Sets the envelope’s curvature
b LFO Waveform Triangle, Sine,
Vintage
Selects the LFO Waveform
LFO Shape –100…+100 Changes the curvature of the LFO
Waveform
c LFO Phase [de-
gree]
–180…+180 Sets the LFO phase difference between
the left and right
d LFO Frequency
[Hz]
0.02…20.00 Sets the speed of the LFO
Envelope Amount
[Hz]
–20.00…
+20.00
Sets the amount added to or subtracted
from the Frequency when the envelope is
at maximum
e Depth 0…10 0 Sets the initial amount of tremolo
Envelope Amount –100…+100 Sets the amount added to or subtracted
from the Depth when the envelope is at
maximum
f Wet/Dry Dry, 1:99…99:1,
Wet
Balance between the wet and dry signal
Src Off…Tempo See DMS (Dynamic Modulation Source)
Amt –100…+100 Amount of modulation source