Chorus, Flanger, and Phaser (Cho/Fln Phaser) |461
34: St. Random Flanger (Stereo Random Flanger)
The stereo effect uses a step-shape waveform and random LFO for modula-
tion, creating a unique flanging effect.
LFO: Step-Tri/Random
Left
Right
Feedback
LFO Phase
FX Amt
FX Amt
High Damp
Stereo In - Stereo Out
Flanger
Flanger
a Delay Time [msec] 0.0…50.0 Sets the delay time from the original
sound
b LFO Waveform Step-Tri,
Random
Selects the LFO Waveform
LFO Phase [degree] –180…+180 Sets the LFO phase difference between
the left and right
c LFO Frequency [Hz] 0.02…20.00 Sets the speed of the LFO
Src Of f…Tempo Selects the modulation source used for
both LFO speed and step speed
Amt –20.00…
+20.00
Sets the modulation amount of LFO
speed
d LFO Step Freq [Hz] 0.05…50.00 Sets the LFO step speed (speed that
changes in steps)
Step Amt –50.00…
+50.00
Sets the modulation amount of LFO step
speed
e MIDI Sync Off, On When this is on, the LFO speed is set by
BPM, Base Note, and Times, instead of
Frequency
BPM MIDI,
40.00…
300.00
MIDI syncs to the system tempo; 40–
300 sets the tempo manually for this
individual effect
Base Note
…
Selects the type of notes that specify
the LFO speed
Times x1…x32 Sets the number of notes that specify
the LFO speed
To Next Page
Loading...
Need help?
General
