EQ and Filters (EQ/Filter) |415
You can configure a 21-Band Graphic EQ ranging from 80 Hz to 18 kHz if
you route three Graphic 7-Band EQ effects in series, with a setting of 7:Low,
9:Mid, and 11:High for each EQ.
8: St.Exciter/Enhncr (Stereo Exciter/Enhancer)
This effect is a combination of the Exciter, which adds a punch to the sound
and the Enhancer, which adds spread and presence.
Left
Right
FX Amt
FX Amt
Stereo In - Stereo Out
EQ Trim
LEQ HEQ
EQ Trim
Delay
Delay
Depth
D
-mod
Exciter
Exciter
Enhancer
a Exciter Blend –100…+100 Sets the intensity (depth) of the Exciter
effect
Src Of f…Tempo Selects the modulation source of the
Exciter intensity
Amt –100…+100 Sets the modulation amount of the
Exciter intensity
b Emphasis Freq 0…70 Sets the frequency to be emphasized
Src Of f…Tempo Selects the modulation source of the
frequency to be emphasized
Amt –70…+70 Sets the amount of modulation of the
frequency to be emphasized
c Enhancer Delay L
[msec]
0.0…50.0 Sets the delay time for the Enhancer left
channel
d Enhancer Delay R
[msec]
0.0…50.0 Sets the delay time for the Enhancer
right channel
e Enhancer Depth 0…10 0 Sets the determines to what degree the
Enhancer effect is applied
Src Of f…Tempo Selects the modulation source of the
Enhancer width
Amt –100…+100 Sets the modulation amount of the
Enhancer width
f EQ Trim 0…10 0 Sets the 2-band EQ input level