416| Effects for the MIDI Sounds
g Pre LEQ Fc Low,
Mid-Low
Selects the cutoff frequency (low or
mid-low) of the low-range equalizer
Pre HEQ Fc High,
Mid-High
Selects the cutoff frequency (high or
mid-high) of the high-range equalizer
h Pre LEQ Gain [dB] –15.0…+15.0 Gain of the Lo EQ
Pre HEQ Gain [dB] –15.0…+15.0 Gain of the High EQ
i Wet/Dry Dry,
1:99…99:1,
Wet
Balance between the wet and dry sig-
nal
Src Of f…Tempo See DMS (Dynamic Modulation Source)
Amt –100…+100 Amount of modulation source
a: Exciter Blend
This parameter sets the depth (intensity) of the Exciter effect. Positive values
give a frequency pattern (to be emphasized) different from negative values.
b: Emphasis Freq
This parameter sets the frequency to be emphasized. Higher values will em-
phasize lower frequencies.
c: Enhancer Delay L [msec]
d: Enhancer Delay R [msec]
These parameters set the delay time for the Enhancer left and right channel.
Specifying a slightly different delay time for the left and right channel will
add a stereo image, depth, and width to the sound.
To Next Page
Loading...
Need help?
General
