664| MIDI
There are various messages, but here are the most commonly used:
MIDI Message CC# Meaning
Note On This message instructs an instrument to play a note on a
specic channel. Notes have both a name (C4 standing
for the center C) and a number (60 being the equivalent
for C4). A Note Off message is often used to say the note
has been released.
Together with the Note On message, a Velocity value is
always sent. This value tells the instrument how loud the
note must play.
Pitch Bend (PB) You can generate this message acting on the joystick (X
direction). The pitch is translated up or down.
Program Change (PC) When you select a Sound, a Program Change message
is generated on the channel. Use this message, togeth-
er with Control Change 00 and 32, to remotely select
Havian 30 data from a sequencer or a master keyboard.
Control Change (CC) This is a wide array of messages, controlling most of the
instrument parameters. Some examples:
Bank Select MSB 00 This message pair is used to select a Sound Bank.
Together with the Program Change message, they are
used to select a Sound.
Bank Select LSB 32
Modulation 01 This is the equivalent of pressing up the joystick. A vi-
brato effect is usually triggered on.
Master Volume 07 Use this controller to set the channel’s volume.
Pan 10 This one sets the channel’s position on the stereo front.
Expression 11 Use this controller to set the relative volume of tracks,
with the maximum value matching the current setting of
the CC07 control.
Damper Pedal 64 Use this controller to simulate the Damper pedal.
Tempo
Tempo is a global MIDI message, that is not tied to a particular channel. Each
MIDI Song includes Tempo data.
Lyrics
Lyric Meta Events are intended to display text together with the music.
Havian 30 can read many of the available Lyrics format on the market.
To Next Page
Loading...
Need help?
General
