Mixing and retriggering the drum samples |349
Mixing and retriggering the drum samples
You can choose a triggering mode, and mix the key (usually a percussive
sound with its different velocity layers) with the other keys. All layers of the
selected key will get the same settings.
▪ Go to the Sound > DrumKit > Voice/Mixer page.
Choosing the key to edit
▪ Use the Key parameter to select a key. As an alternative, select it by pressing
a key on the keyboard.
The Layers and Assign parameters are the same of the Sample Setup page.
Choosing polyphony, retriggering and legato
▪ Use the Single Trigger checkbox to choose the triggering mode.
Single Trigger Meaning
On When the same key (note) is played repeatedly, the previous note
will be stopped before the new note is triggered, so that they will
not overlap.
Off When the same key (note) is played repeatedly, the previous note
will not be stopped before the new note is triggered.
To Next Page
Loading...
Need help?
General
