424| Effects for the MIDI Sounds
12: St. Random Filter (Stereo Random Filter)
This stereo band pass filter uses a step-shape waveform and random LFO for
modulation. You can create a special effect from filter oscillation.
Filter
Left
Right
FX Amt
FX Amt
Stereo In - Stereo Out
Filter
LFO Phase
LFO: Step-Tri/Random
a LFO Waveform Step-Tri,
Random
Selects the LFO Waveform
LFO Phase [degree] –180…+180 Sets the LFO phase difference between
the left and right
b LFO Frequency [Hz] 0.02…20.00 Sets the speed of the LFO
Src Of f…Tempo Selects the modulation source used for
both LFO speed and step speed
Amt –20.00…
+20.00
Sets the modulation amount of LFO
speed
c LFO Step Freq [Hz] 0.05…50.00 Sets the LFO step speed (speed that
changes in steps
Amt –50.00…
+50.00
Sets the modulation amount of LFO step
speed
d MIDI Sync Off, On When this is on, the LFO speed is set by
BPM, Base Note, and Times, instead of
Frequency
BPM MIDI,
40.00…
300.00
MIDI syncs to the system tempo; 40–
300 sets the tempo manually for this
individual effect
Base Note
…
Selects the type of notes that specify
the LFO speed
Times x1…x32 Sets the number of notes that specify
the LFO speed
e Step Base Note
…
Selects the type of notes to specify the
LFO step speed
Times x1…x32 Sets the number of notes to specify the
LFO step speed
To Next Page
Loading...
Need help?
General
