Installing the Korg USB MIDI Driver |681
Installing the Korg USB MIDI Driver
The USB DEVICE port can be used for MIDI communication between Havian
30 and a personal computer. A dedicated driver is supplied in the Accessory
Disc, and an up-to-date driver can be found on our web site.
KORG USB-MIDI Driver system requirements
Be sure your personal computer meets the following requirements.
OS Computer Operating System
Windows A computer with an USB port,
that satises the requirements of
Microsoft Windows Vista, 7 or 8
Windows Vista/7/8/8.1, 32 or 64 bit
Mac An Apple Mac with an USB port that
satises the requirements of Mac
OS X
Mac OS X version 10.3 or later
Copyright notice
Copyright to all software included in this product is the property of Korg Inc.
The license agreement for this software is provided separately. You must
read this license agreement before you install this software. Your installation
of this software will be taken to indicate your acceptance of this agreement.
Installing the KORG USB-MIDI Driver on a Windows PC
Please connect Havian 30 to the computer via an USB cable only after hav-
ing installed the KORG USB-MIDI Driver Tools.
1 Insert the included Accessory Disc into the optical drive of your Windows
PC.
2 Open the folder DVD-ROM\USB-MIDI Driver\Win - KORG USB-MIDI Driver
v.n.nn\ and double-click on KORG USB-MIDI Driver Tools Setup v.n.nn.exe
to run the installer (‘n.nn’ meaning the version number).
3 Follow the instructions appearing on screen. At the end, the tools will be
installed.
4 When installation is completed, connect the USB DEVICE port of your Havian
30 to one of the USB ports of your Windows PC by using a standard USB
cable. The Auto Installer will immediately start.
To Next Page
Loading...
Need help?
General
