306| Editing the MIDI Songs
Cutting or inserting measures
You can delete a selected measure (or a series of measures), or insert new
ones in the middle of the Song.
1 Go to the Sequencer > Song Edit > Cut/Insert page.
2 Use the Start parameter to select the first measure to be cut or inserted.
3 Use the Length parameter to choose the number of measures to be cut or
inserted.
4 Use the Meter parameter to set the meter (time signature) of the measure
to be inserted.
5 After having set the various parameters, touch Execute.
Deleting data from measures
The Delete page is where you delete MIDI events out of the Song. This func-
tion does not remove measures from the Song. To remove whole measures,
use the Cut function instead.
1 Go to the Sequencer > Song Edit > Delete page.
To Next Page
Loading...
Need help?
General
