Editing the Song tracks |307
2 Select the Track to edit.
Track Meaning
All All tracks selected
Track 1 … 16 Selected track
Master Master track. This is where the Tempo, Scale and Effect events
are recorded.
3 Use the Event pop-up menu to choose the the transpose value.
Event Meaning
All All events. The measures are not removed from the Song.
Note All notes in the selected range.
Dup.Note All duplicate notes. When two notes with the same pitch are en-
countered on the same tick, the one with the lowest velocity is
deleted.
After Touch After Touch events.
Pitch Bend Pitch Bend events.
Prog.Change Program Change events, excluding the bundled Control Change
#00 (Bank Select MSB) and #32 (Bank Select LSB).
Ctl.Change All Control Change events, for example Bank Select, Modulation,
Damper, Soft Pedal…
CC00/32 … CC127 Single Control Change events. Double Control Change numbers
(like 00/32) are MSB/LSB bundles.
4 Use the Start Tick and End Tick parameters to set the beginning and ending
of the phrase to be deleted.
If a phrase is four measures long, and you want to select it all, the Start will
be positioned at 1.01.000, and the End at 5.01.000.
5 Use the Bottom Note and Top Note parameters to set key range to quantize.
These parameters are available only when the All or Note option is selected.
If you select the same note as the Bottom and Top parameters, you can se-
lect a single percussive instrument.
6 After having set the various parameters, touch Execute.
To Next Page
Loading...
Need help?
General
