Korg HAVIAN 30 User Manual

522| Effects for the MIDI Sounds
a BPM MIDI,
40.00…
300.00
MIDI syncs to the system tempo; 40–300 sets
the tempo manually for this individual effect
Time Over? ---, OVER! Displays an error message when the delay time
exceeds the upper limit
b L Delay Base
Note
…
Selects the type of notes to specify the delay
time for TapL
Times x1…x32 Sets the number of notes to specify the delay
time for TapL
Level 0…50 Sets the output level of TapL
c C Delay Base
Note
…
elects the type of notes to specify the delay time
for TapC
Times x1…x32 Sets the number of notes to specify the delay
time for TapC
Level 0…50 Sets the output level of TapC
d R Delay Base
Note
…
Selects the type of notes to specify the delay
time for TapR
Times x1…x32 Sets the number of notes to specify the delay
time for TapR
Level 0…50 Sets the output level of TapR
e Feedback
(C Delay)
–100…
+10 0
Sets the feedback amount of TapC
Src Off…
Tempo
Selects the modulation source for the TapC
feedback
Amt –100…
+10 0
Sets the modulation amount of the TapC feed-
back
f High Damp [%] 0…10 0 Sets the damping amount in the high range
Low Damp [%] 0…10 0 Sets the damping amount in the low range
g Input Level
Dmod [%]
–100…
+10 0
Sets the modulation amount of the input level
Src Off…
Tempo
Selects the modulation source for the input level
h Spread 0…50 Sets the width of the stereo image of the effect
sound
i Wet/Dry Dry,
1:99…99:1,
Wet
Balance between the wet and dry signal
Src Off…
Tempo
See DMS (Dynamic Modulation Source)
Amt –100…
+10 0
Amount of modulation source

Korg HAVIAN 30 Specifications

General

Brand	Korg
Model	HAVIAN 30
Category	Musical Instrument
Language	English