Double Size |593
e Tap4 (240) [msec] 0…2000 Sets the Tap4 (LFO phase=240
degrees) delay time
Depth 0…30 Sets the Tap4 chorus depth
Status Always On, Always
Off, On›Off (Dm),
Off›On (Dm)
Selects on, off, or modulation
source for the control of Tap4
output
f Tap5 (120) [msec] 0…2000 Sets the Tap5 (LFO phase=120
degrees) delay time
Depth 0…30 Sets the Tap5 chorus depth
Status Always On, Always
Off, On›Off (Dm),
Off›On (Dm)
Selects on, off, or modulation
source for the control of Tap5
output
g Tap6 (300) [msec] 0…2000 Sets the Tap1 (LFO phase=300
degrees) delay time
Depth 0…30 Sets the Tap6 chorus depth
Status Always On, Always
Off, On›Off (Dm),
Off›On (Dm)
Selects on, off, or modulation
source for the control of Tap6
output
h Panning Preset 1 : L 1 2 3 4 5 6 R,
2 : L 135 246 R,
3 : L 1 3 5 2 4 6 R,
4 : L 1 4 5 6 3 2 R
Selects the stereo panning pat-
tern for each tap
i Tap1 Feedback –100…+100 Sets the Tap1 feedback amount
Src Off…Tempo Selects the modulation source
for the Tap output level, feed-
back amount, and effect bal-
ance
Amt –100…+100 Sets the modulation amount of
Tap1 feedback amount
j Wet/Dry Dry, 1:99…99:1, Wet Balance between the wet and
dry signal
Src Off…Tempo See DMS (Dynamic Modulation
Source)
Amt –100…+100 Amount of modulation source