Choosing different Sounds |137
▪ To choose one of the available types of Sound, touch the buttons at the top
of the window.
Type of Sound Meaning
Factory Standard Sounds, that cannot be modied.
Legacy Standard Sounds allowing for greater compatibility with older Pa-
Series instruments.
GM/XG Standard Sounds, allowing for full compatibility with General MIDI
Sounds and XG Drum Kits.
User Locations where you can load new Sounds from an external device,
or save new or edited Sounds.
User DK Locations where you can load new Drum Kits, or save new or edited
Drum Kits.
▪ To choose a different group of Sounds, touch one of the tabs on the sides
of the window.
▪ To choose one of the available pages in the selected Sound group, touch one
of the P1…Px tabs at the bottom of the window.
2 Touch the name of the Sound you want to choose.
3 If you want to close the Sound Select window (and it does not close by itself),
press the EXIT button. (When a window does not close by itself, it means the
Display Hold is turned on. See Display Hold on page 52).
Memorize the assigned Sounds
▪ Write the changes to a Sound set.
To Next Page
Loading...
Need help?
General
