216| Recording the Styles
2 Go the Style Record > Guitar Mode page.
Choosing a Key/Chord for Intro 1 and Ending 1
The pattern is recorded in the key indicated by the Key/Chord pair of param-
eters. However, this parameter is only used for playback by the Intro 1 and
Ending 1 Style Elements. All other Style Elements will be played back accord-
ing to the recognized chord.
This parameter pair works in a different way than the other tracks. While
with other tracks this is always the reference key used for NTT transposi-
tion, with Guitar tracks there is a difference, whether you are recording a
Chord Variation contained in an Intro 1 or Ending 1 Style Element, or any
other Chord Variation:
▪ With Intro 1 and Ending 1, this chord will be used as the reference key for the
chord progression.
▪ With all the other Chord Variations, this chord will be used only for listening
during recording. During playback in Style Play mode, the chord will follow
chord recognition.
With Intro 1 and Ending 1 (both Chord Variation 1 and 2) you can also prefer
to enter a chord progression, to be played on the lowest MIDI octave (from
C-1 to B-1). Chord types are inserted by using velocity values, as shown in the
following table:
To Next Page
Loading...
Need help?
General
