Editing the Style patterns |231
1 Go to the Style Record > Style Edit > Velocity page.
2 Select the Track, Style Element (E) and Chord Variation (CV) to edit.
Track Meaning
All All tracks selected. The velocity for all notes of the whole selected
Chord Variation will be changed.
Drum … Acc5 Selected track.
3 Use the Velocity Value parameter to choose the transpose value.
Value Meaning
-127 … 127 Velocity change value (in MIDI value)
4 If you want to use the advanced parameters, allowing you to select a velocity
curve and create fade-ins or fade-outs, select the Advanced checkbox.
When this parameter is selected, the Intensity, Curve, Start Velocity Value
and End Velocity Value parameters become accessible.
▪ Use the Intensity parameter to specify the degree to which the velocity data
will be adjusted toward the curve you specify with Curve.
Intensity Meaning
0 … 100% Intensity value. With a setting of 0%, the velocity will not change.
With a setting of 100%, the velocity will be changed the most.
To Next Page
Loading...
Need help?
General
