276| Recording MIDI Songs
Set a starting point (left locator)
▪ Set the Start from measure number to choose the alternative starting posi-
tion from where to start playback.
Select the Start from checkbox to activate the alternative starting position.
When pressing the HOME ( ) button, or using the REWIND ( ) button to
go back to the beginning, the Song will return to this point.
Choose a quantize resolution for recording
▪ Set the recording Resolution.
Resolution Meaning
High No quantization applied
(1/32) … (1/8)
Grid resolution, in musical values. For example, when you select
1/16, all notes are moved to the nearest 1/16 division. When you
select 1/8, all notes are moved to the nearest 1/8 division. A ‘3’
after the quantization value means triplet.
1/16
1/8
Set the Tempo and Meter
▪ Change the Tempo value. Use the Tempo pop-up menu to choose the way
Tempo events will be recorded.
Tempo Mode Meaning
Manual Manual reading. The latest manual Tempo setting (made using
the TEMPO buttons) is considered the current Tempo value. No
Tempo change events will be recorded. This is very useful when
you want to record the Song at a much slower speed than the
actual Tempo.
Auto Auto reading. The Sequencer plays back all recorded Tempo
events. No Tempo change events are recorded.
Record All Tempo changes made during recording will be recorded to the
Master Track. Tempo is always recorded in overwrite mode (old
data is replaced by the new data).
To Next Page
Loading...
Need help?
General
