298| Editing the MIDI Songs
Filtering the events shown
▪ Go to the Sequencer > Event Edit > Filter page to select the events to display.
Filter Meaning
Note/RX Noise Notes and RX Noise events
Program Program Change events
Control Control Change events
Tempo/Meter Tempo and Meter (time signature) changes (Master Track only)
Pitch Bend Pitch Bend events
Pa Controls Messages exclusive to the Havian 30 and Pa-Series instruments.
Edit the events
1 Go back to the Sequencer > Event Edit > Event Edit page.
2 Use the Track pop-up menu to select the track to edit.
The list of events contained in the selected track will appear in the display.
Some events on the beginning of the track, as well as the “EndOfTrk” event
(marking its ending point) cannot be edited, and appear dimmed.
3 Scroll though the various events by using the scrollbar.
4 Touch the event to be edited, and edit it.
Type
Value 1 Value 2 Duration/Lenght
▪ Select the M (Measure), and use the VALUE dial to change event’s position.
▪ Select the Type parameter, and use the VALUE to change the event type.
To Next Page
Loading...
