390| Editing the Sounds
AMS Description Note
JS+Y & AT/2 (Joy Stick
+Y & After Touch/2)
Joystick +Y (vertical upward)
direction and After Touch (re-
ceived/transmitted via MIDI
or contained in Standard MIDI
Files)
The effect will be controlled by
the joystick +Y (vertically up-
ward) and by after touch. In this
case, the effect of after touch
will be only half of the specied
intensity.
JS–Y & AT/2 (Joy Stick
Y & After Touch/2)
Joystick Y (vertical downward)
direction and After Touch (re-
ceived/transmitted via MIDI
or contained in Standard MIDI
Files)
The effect will be controlled by
the joystick Y (vertically down-
ward) and by after touch. In this
case, the effect of after touch
will be only half of the specied
intensity.
Assign. Pedal Assignable foot pedal (CC#04)
Ribbon Ctl. Ribbon controller (CC#16) (received/transmitted via MIDI or con-
tained in Standard MIDI Files)
CC#18 CC#18
CC#17 CC#17
CC#19 CC#19
CC#20 CC#20
CC#21 CC#21
Damper Damper pedal (CC#64)
CC#65 Portamento switch (CC#65)
Sostenuto Sostenuto pedal (CC#66)
CC#80 CC#80
CC#81 CC#81
CC#82 CC#82
CC#83 CC#83
Tempo Tempo (tempo data from Sequencer 1 clock or external MIDI
clock)
Velocity Plus Key On and Key Off Velocity are used
Velocity Exp Velocity with Exponential curve (higher velocity notes are even
louder)
Velocity Log Velocity with Logarithmic curve (higher velocity notes are weaker
than with the linear Velocity)
To Next Page
Loading...
Need help?
General
