Modulation and Pitch Shift (Mod./P.Shift) |473
a AUTOFADE Src Off…Tempo Selects the modulation source that
starts AutoFade
Fade-In Delay [msec] 00…2000 Sets the fade-in delay time
Rate 1…10 0 Sets the rate of fade-in
b LFO Frequency Mod D-mod,
AUTOFADE
Switches between D-mod and
AUTOFADE for the LFO frequency
modulation
Wet/Dry Mod D-mod,
AUTOFADE
Switches between D-mod and
AUTOFADE for the effect balance
modulation
c LFO Waveform Triangle, Sine Selects the LFO Waveform
LFO Shape –100…+100 Changes the curvature of the LFO
Waveform
d LFO Phase [degree] –180…+180 Sets the LFO phase difference be-
tween the left and right
e LFO Frequency [Hz] 0.02…20.00 Sets the speed of the LFO
Src Of f…Tempo Selects a modulation source for LFO
speed
Amt –20.00…
+20.00
Sets the modulation amount of LFO
speed
f L Delay Time [msec] 0.0…500.0 Sets the left channel delay time
R Delay Time [msec] 0.0…500.0 Sets the right channel delay time
g Depth 0…200 Sets the depth of LFO modulation
h Feedback –100…+100 Sets the feedback amount
High Damp [%] 0…10 0 Sets the feedback damping amount in
the high range
i Wet/Dry -Wet, -1:99…
Dry…99:1,
Wet
Balance between the wet and dry sig-
nal
Src Of f…Tempo See DMS (Dynamic Modulation
Source)
Amt –100…+100 Amount of modulation source