Delay |509
j Wet/Dry Dry, 1:99…99:1,
Wet
Balance between the wet and dry signal
Src Off…Tempo See DMS (Dynamic Modulation Source)
Amt –100…+100 Amount of modulation source
Mode: Normal Mode: Cross Feedback Mode: Cross Pan1 Mode: Cross Pan2
a: Mode
You can change how the left and right delay signals are panned by modify-
ing the routing of the left and right delay as shown in the figure above. You
need to input different sounds to each channel in order for this parameter
to be effective.
d: Tap1 Level
This parameter sets the output level of Tap1. Setting a different level from
Tap2 will add a unique touch to a monotonous delay and feedback.
To Next Page
Loading...
Need help?
General
