Delay |511
f MIDI Sync Off, On When this is on, the LFO speed is set by
BPM, Base Note, and Times, instead of
Frequency
BPM MIDI,
40.00…
300.00
MIDI syncs to the system tempo; 40–300
sets the tempo manually for this individ-
ual effect
Base Note
…
Selects the type of notes that specify the
LFO speed
Times x1…x32 Sets the number of notes that specify the
LFO speed
g L LFO Phase [deg] –180…+180 Sets the phase obtained when the left
LFO is reset
L Depth 0…200 Sets the depth of the left LFO modulation
h R LFO Phase [deg] –180…+180 Sets the phase obtained when the right
LFO is reset
R Depth 0…200 Sets the depth of the right LFO modula-
tion
i L Delay Time [msec] 0.0…1000.0 Sets the delay time for the left channel
L Feedback –100…+100 Sets the feedback amount of left delay
j R Delay Time [msec] 0.0…1000.0 Sets the delay time for the right channel
R Feedback –100…+100 Sets the feedback amount of right delay
k Wet/Dry -Wet, -1:99…
Dry…99:1,
Wet
Balance between the wet and dry signal
Src Of f…Tempo See DMS (Dynamic Modulation Source)
Amt –100…+100 Amount of modulation source
b: D-mod Modulation
When the modulation source is used for control, this parameter reverses the
left and right modulation direction.
d: LFO Sync
d: Src
g: L LFO Phase [deg]
h: R LFO Phase [deg]
If “LFO Sync” is On, the LFO will be reset by the modulation source that is
received.
To Next Page
Loading...
Need help?
General
