Delay |515
a L Delay Time [msec] 0.0…1360.0 Sets the delay time for the left channel
L Feedback –100…+100 Sets the feedback amount for the left
channel
b R Delay Time [msec] 0.0…1360.0 Sets the delay time for the right channel
R Feedback –100…+100 Sets the feedback amount for the right
channel
c High Damp [%] 0…10 0 Sets the damping amount in the high
range
Low Damp [%] 0…10 0 Sets the damping amount in the low
range
d LFO Waveform Triangle, Sine Selects the LFO Waveform
LFO Shape –100…+100 Changes the curvature of the LFO
Waveform
e Phase [degree] –180…+180 Sets the LFO phase difference between
the left and right
f Panning Freq [Hz] 0.02…20.00 Sets the panning speed
g MIDI Sync Off, On Switches between using the frequency
of the panning speed and using the
tempo and notes
BPM MIDI,
40.00…
300.00
MIDI syncs to the system tempo; 40–
300 sets the tempo manually for this in-
dividual effect
Base Note
…
Selects the type of notes to specify the
delay time for the panning speed
Times x1…x32 Sets the number of notes to specify the
delay time for the panning speed
h Panning Depth 0…10 0 Sets the panning width
Src Off…Tempo Selects the modulation source for the
panning width
Amt –100…+100 Set the modulation amount of the pan-
ning width
i Wet/Dry Dry,
1:99…99:1,
Wet
Balance between the wet and dry signal
Src Off…Tempo See DMS (Dynamic Modulation Source)
Amt –100…+100 Amount of modulation source
To Next Page
Loading...
Need help?
General
