Mono-Mono Serial (Mono-Mono) |571
OD/HI-GAIN
a [O]Drive Mode Overdrive, Hi-Gain Switches between overdrive
and high-gain distortion
Drive 1…10 0 Sets the degree of distortion
b [O]Output Level 0…50 Sets the overdrive output level
Src Of f…Tempo Selects the modulation source
for the overdrive output level
Amt –50…+50 Sets the modulation amount of
the overdrive output level
e [O]Low Cutoff [Hz] 2 0…1. 0 0 k Sets the center frequency for
Low EQ (shelving type)
Gain [dB] –18…+18 Sets the gain of Low EQ
f [O]Mid1 Cutoff [Hz] 300…10.00k Sets the center frequency for
Mid/High EQ 1 (peaking type)
Q 0.5…10.0 Sets the band width of Mid/
High EQ 1
Gain [dB] –18…+18 Sets the gain of Mid/High EQ 1
g [O]Mid2 Cutoff [Hz] 500…20.00k Sets the center frequency for
Mid/High EQ 2 (peaking type)
Q 0.5…10.0 Sets the band width of Mid/
High EQ 2
Gain [dB] –18…+18 Sets the gain of Mid/High EQ 2
PHASER
h [P]LFO Frequency [Hz] 0.02…20.00 Sets the speed of the LFO
LFO Waveform Triangle, Sine Selects the LFO Waveform
i [P]Manual 0…10 0 Sets the frequency to which the
effect is applied
Depth 0…10 0 Sets the depth of LFO modula-
tion
Resonance –100…+100 Sets the resonance amount
j [P]Phaser Wet/Dry -Wet, -1:99…
Dry…99:1, Wet
Sets the phaser effect balance
Src Of f…Tempo Selects the Wet/Dry modulation
source for the phaser
Amt –100…+100 Sets the Wet/Dry modulation
amount for the phaser