Double Size |595
c Fine [cents] –100…+100 Sets the pitch shift amount in steps of one
cent
Amt –100…+100 Sets the modulation amount of pitch shift
amount
d L Delay [msec] 0…2000 Sets the delay time for the left channel
e R Delay [msec] 0…2000 Sets the delay time for the right channel
f Feedback –100…+100 Sets the feedback amount
High Damp [%] 0…10 0 Sets the damping amount in the high
range
g Feedback Position Pre, Post Switches the feedback connection
Spread –100…+100 Sets the width of the stereo image of the
effect sound
h Input Level Dmod
[%]
–100…+100 Sets the modulation amount of the input
level
Src Off…Tempo Selects the modulation source for the in-
put level
i Wet/Dry Dry,
1:99…99:1,
Wet
Balance between the wet and dry signal
Src Off…Tempo See DMS (Dynamic Modulation Source)
Amt –100…+100 Amount of modulation source
a: L/R Pitch
When you select Up/Down for this parameter, the pitch shift amount for the
right channel will be reversed. If the pitch shift amount is positive, the pitch
of the left channel is raised, and the pitch of the right channel is lowered.
To Next Page
Loading...
Need help?
General
