702| Managing files
Choose the target device
After touching Save, the target device appears:
1 If saving to an external device, connect the device to the USB HOST port.
2 Use the Device pop-up menu to choose the target device.
Choose an existing SET folder
You can save data into an existing SET folder. If you are saving data that is
not yet in the target folder, data will be merged. Otherwise, it will be over-
written.
▪ Select an existing SET folder, and touch the Save command to confirm.
Create a new SET folder
You can create a new, empty SET folder to save your data without overwrit-
ing anything.
1 Touch the New SET button to create a new SET folder. The Create New SET
Folder dialog appears:
2 Touch the Text Edit ( ) icon to open the virtual keyboard and edit the
name. When done editing the name, confirm by touching the OK button un-
der the virtual keyboard.
To Next Page
Loading...
Need help?
General
