EasyManua.ls Logo

Lucent Technologies CBX 3500 - Page 882

Lucent Technologies CBX 3500
888 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Index-10 ATM Services Configuration Guide for CBX 3500, CBX 500, GX 550, and B-STDX 9000
Index
Beta Draft Confidential
PNNI Reroute Load Balancing, 21-20 to 21-24
criteria, 21-20
defining reroute tuning parameters, 21-21
PNNI reroute time tuning
reroute count, 21-21, 21-24
reroute delay, 21-21, 21-24
reroute ratio, 21-21
PNNI Resilient UNI/APS Resilient UNI, 21-25 to
21-26
PNNI routing protocol
enabling, 18-2
PNNI, see private network-to-network interface
Point-to-Multipoint (PMP) circuits
adding leafs to, 10-81 to 10-86
configuring, 10-71
enabling reroute balance on, 10-78
on OPTimum trunks, 10-86
specifying circuit priority, 10-79
Point-to-Multipoint PVC leafs
configuring parameters, 10-83
selecting an endpoint, 10-83
Point-to-Multipoint PVC roots
configuring parameters, 10-76
selecting an endpoint, 10-72
Point-to-Multipoint SPVC leaves
modifying, 18-41
selecting an endpoint, 18-38
Point-to-Multipoint SPVC roots
configuring parameters, 18-32
deleting, 18-37
Point-to-Point logical ports, 9-19
Policy mapping
VPN-PNNI, 21-32
Policy-based circuits
configure, 21-39
Polling
for ILMI, 2-5, 3-35
VCI, 4-27
VPI, 4-27
Polling period
ILMI, 4-27
Port
prefixes
configuring, 17-41 to 17-53
custom AESA, 17-47
DCC, 17-44
defining a default route, 17-52
E.164 AESA, 17-45
ICD, 17-44
ILMI-eligible, 16-8
native E.164, 17-42
setting gateway addresses, 17-49
security screening
defined, 1-5
Port security screening
assigning screens, 20-10 to 20-13
defined, 20-2
egress screen mode, 20-3
sample configuration, 20-5
screen addresses, 20-4
POS LPort
configuring, 9-19 to 9-31
PPD, see Partial packet discard
PPP logical port
configuring, 9-19
Prefix screen mode
UNI DTE ports, 3-36
Primary LPort
returning to service, 14-9
Priority frame
configuring for ATM logical ports, 4-34
Priority routing, E-1 to E-6
configuring PVCs, 10-28, 10-62
for SVCs, 17-9
interoperability with previous releases, E-5
Private network-to-network interface (PNNI)
configuring PNNI routing, 21-41
connecting a PNNI network, 11-2
external name, 17-39
GX 550 Fast APS 1+1 PNNI interworking, 7-12,
7-36
hierarchical organization, 21-8
holdoff timer, 17-15
importing exterior addresses, 21-17
Lucent ATM SPVC node prefix, 21-15
name translation, 7-62
Native E.164 address advertisement, 21-18
organizational scope, 17-31
PNNI administrative weight, 7-38, 21-13, 21-51
PNNI/VNN gateway support, 21-17

Table of Contents

Related product manuals