EasyManua.ls Logo

Lucent Technologies CBX 3500 - Page 881

Lucent Technologies CBX 3500
888 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Index
ATM Services Configuration Guide for CBX 3500, CBX 500, GX 550, and B-STDX 9000 Index-9
Beta Draft Confidential
enabling on PVCs, 10-29
enabling on UNI ports, 3-36, 4-27
timer threshold, 3-36, 4-27
OPTimum cell trunks
configuring for B-STDX, 4-37
OPTimum frame trunks
configuring for B-STDX, 4-40
specifying VCI for, 4-16
specifying VPI for, 4-16
OPTimum trunks, 2-8
maximum cell delay variation, 3-23
PMP circuit leafs on, 10-86
vpi range, 3-45
OSPF
area support, 17-39
IP parameters, 9-39
OSPF-TE, 9-41
Overload Severity, 10-7
Oversubscription, 2-19
Oversubscription of QoS, 9-26
Overview
ATM Flow Control Processor (FCP)
configuration, 6-2
P
Partial packet discard (PPD), 5-18
support, 10-32
Path selection
non-restricted (public), 21-29
restricted, 21-29
PBR. See PNNI Policy-based routing
PCR, see peak cell rate
Peak cell rate (PCR)
definition of, 12-4
PVCs, 10-24, 10-58, 10-79, 12-9, 18-18
Permanent virtual circuit (PVC)
adding, 10-13 to 10-33
administrative cost, 10-18, 10-51
bypassing OSPF, 10-16, 10-68 to 10-70, 18-24 to
18-26
configuring
fault tolerance, 10-15
priority routing, 10-28, 10-62
CS/IWU shaper, 10-25, 10-59, 18-20
defining a new connection, 10-13 to 10-33
EFCI mapping, 10-65
enabling
OAM alarms on, 10-29
reroute balance, 10-29, 10-62
UPC function on, 10-30, 10-63
endpoint creation rules, 10-4
FCP discard, 10-28, 10-62
frame discard, 10-32
frame relay to ATM interworking, 10-40
GX provisioning guidelines, 10-2
manually defining circuit path, 10-16, 10-68 to
10-70, 18-24 to 18-26
MBS, 10-24, 10-58, 10-79, 12-9, 18-18
MCR, 10-24, 10-58, 18-18
moving, 10-89 to 10-91
PCR, 10-24, 10-58, 10-79, 12-9, 18-18
priority for PMP circuits, 10-79
routing thresholds, 10-21
routing with end-to-end delay, 10-19, 10-51
SCR, 10-24, 10-58, 10-79, 12-9, 18-18
specifying traffic descriptor, 10-22
templates, 10-92
VCI, 10-9, 10-10, 10-77
VPI, 10-9, 10-17, 10-77
Per-VC queuing, 5-16
PMP circuits, see point-to-multipoint circuits
PNNI
links
configure tags on, 21-37
tagging PNNI links, 21-29
PNNI address summary
add, 21-48, 21-49
PNNI Features
PNNI Reroute Load Balancing, 21-20
Resilient UNI/APS Resilient UNI, 21-25
PNNI Name Translation, 7-62
PNNI policy-based routing
application of, 21-29
configuration, 21-31
definition of terms, 21-28
description, 21-27
example, 21-30
support, 13-1, 21-27

Table of Contents

Related product manuals