Enterasys b5 - Configure; Copy

configure
3-44 Basic Configuration
configure
Usethiscommandtoexecuteapreviouslydownloadedconfigurationfilestoredontheswitch.
Syntax
configure filename [append]
Parameters
Defaults
Ifappendisnotspecified,thecurrentrunningconfigurationwillbereplacedwiththecontentsof
theconfigurationfile,whichwillrequireanautomatedresetofthechassis.
Mode
Switchcommand,read‐write.
Example
Thisexampleshowshowtoexecutethe“Jan1_2004.cfg”configurationfile:
B5(su)->configure configs/Jan1_2004.cfg
copy
UsethiscommandtouploadordownloadanimageoraCLIconfigurationfile.
Syntax
copy source {destination | system:image}
Parameters
Defaults
None.
filename Specifiesthepathandfilenameoftheconfigurationfiletoexecute.
append (Optional)Appendstheconfigurationfilecontentstothecurrent
configuration.Thisisequivalenttotypingthecontentsoftheconfigfile
directlyintotheCLIandcanbeused,forexample,tomakeincremental
adjustmentstothe
currentconfiguration.
source Specifieslocationandnameofthesourcefiletocopy.Optionsarealocalfile
pathintheconfigsorlog sdirectory,ortheURLofaTFTP,
SecureFTP(SFTP),
orSecureCopy(SCP)
server.
destination Specifieslocationandnameofthedestinationwherethefilewillbecopied.
Optionsarealocalfilepathintheconfigsdirectory,ortheURLofaTFTP,
SFTP,orSCPserver.
system:image Therequireddestinationofanimagefile.
Note: Only TFTP can be used to download an image file.