Enterasys b5

clear port priority-queue
12-6 Port Priority Configuration
Example
Thisexampleshowshowtosetpriority5framesreceivedonge.2.12totransmitonqueue0.
B5(su)->set port priority-queue ge.2.12 5 0
clear port priority-queue
Usethiscommandtoresetportpriorityqueuesettingsbacktodefaultsforoneormoreports.
Syntax
clear port priority-queue port-string
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
Thisexampleshowshowtoclearthepriorityqueuesettingsonge.2.12:
B5(su)->clear port priority-queue ge.2.12
port‐string Specifiestheportforwhichtoclearpriority‐to‐queuemappings.Fora
detaileddescriptionofpossibleport‐stringvalues,referto“ PortString
SyntaxUsedintheCLI”onpage 7‐1.