Enterasys b5 User Manual

show lldp port tx-tlv
Enterasys B5 CLI Reference 6-17
show lldp port tx-tlv
UsethiscommandtodisplayinformationaboutwhichoptionalTLVshavebeenconfiguredtobe
transmittedonports.PortsareconfiguredtosendoptionalTLVswiththesetlldpporttx‐tlv
command.
Syntax
showlldpporttx‐tlv[port‐string]
Parameters
Defaults
Ifport‐stringisnotspecified,TLVconfigurationinforma tionwillbedisplayedforallports.
Mode
Switchcommand,read‐only.
Example
ThisexampleshowshowtodisplaytransmitTLVinformationforthreeports.
B5(ro)->show lldp port tx-tlv ge.1.1-3
* Means TLV is supported and enabled on this port
o Means TLV is supported on this port
Means TLV is not supported on this port
Column Pro Id uses letter notation for enable: s-stp, l-lacp, g-gvrp
Ports Port Sys Sys Sys Mgmt Vlan Pro MAC PoE Link Max MED MED MED MED
Desc Name Desc Cap Addr Id Id PHY Aggr Frame Cap Pol Loc PoE
------- ---- ---- ---- --- ---- ---- ---- --- --- ---- ---- --- --- --- ---
ge.1.1 * * * * * * slg * * * * *
ge.1.2 * * * * * * slg * * *
ge.1.3 * * * * * * slg * * * * *
show lldp port location-info
Usethiscommandtodisplayconfiguredlocationinformationforoneormoreports.Portsare
configuredwithalocationvalueusingthesetlldpportlocation‐infocommand.
Syntax
show lldp port location-info [port-string]
Parameters
port‐string (Optional)DisplaysinformationaboutTLVconfigurationforoneora
rangeofports.
port‐string (Optional)Displaysportlocationinformationforoneorarangeof
ports.

Enterasys b5 Specifications

General

Brand	Enterasys
Model	b5
Category	Other
Language	English