Enterasys b5

clear snmp user
Enterasys B5 CLI Reference 8-11
clear snmp user
UsethiscommandtoremoveauserfromtheSNMPv3security‐modellist.
Syntax
clear snmp user user [remote remote]
Parameters
Defaults
Ifremoteisnotspecified,theuserwillberemovedfromthelocalSNMPengine.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtoremovetheSNMPusernamed“bill”:
B5(su)->clear snmp user bill
show snmp group
UsethiscommandtodisplayanSNMPgroupconfiguration.AnSNMPgroupisacollectionof
SNMPv3userswhosharethesameaccessprivileges.
Syntax
show snmp group [ groupname groupname] [user user] [security-model { v1 | v2c | usm}]
[volatile | nonvolatile | read-only]
Parameters
Defaults
Ifgroupnameisnotspecified,informationaboutallSNMPgroupswillbedisplayed.
Ifuserisnotspecif ied,informationaboutallSNMPuserswillbedisplayed.
Ifsecurity‐modelisnotspecified,userinformationaboutallSNMPversionswillbedisplayed.
Ifnotspecified,informationforallstoragetypeswillbedisplayed.
user
SpecifiesanSNMPv3usertoremove.
remoteremote (Optional)RemovestheuserfromaspecificremoteSNMPengine.
groupname
groupname
(Optional)DisplaysinformationforaspecificSNMPgroup.
useruser (Optional)Displaysinformationaboutuserswithinthespecifiedgroup.
security‐modelv1|
v2c|usm
(Optional)Displaysinformationaboutgroupsassignedtoasp ecific
securitySNMPmodel.
volatile|
nonvolatile|read‐
only
(Optional)DisplaysSNMPgroupinformationforaspecified
storagetype.