clear lldp port tx-tlv
6-34 Discovery Protocol Configuration
Defaults
Atleastoneapplica tion (orall)andonepolicyparametermustbespecified.
Mode
Switchcommand,read‐write.
Example
Thisexamplereturnsallnetworkpolicyvaluesforallapplicationsonportge.1.1totheirdefault
values.
B5(rw)->clear lldp port network-policy all state tag vid cos dscp ge.1.1
clear lldp port tx-tlv
UsethiscommandtocleartheoptionalLLDPandLLDP‐MEDTLVs tobetransmittedin
LLDPDUsbythespecifiedportorportstothedefaultvalueofdisabled.
Syntax
clear lldp port tx-tlv {[all] | [port-desc] [sys-name] [sys-desc] [sys-cap] [mgmt-
addr] [vlan-id] [stp] [lacp] [gvrp] [mac-phy] [poe] [link-aggr] [max-frame] [med-
cap] [med-pol] [med-loc] [med-poe]} port-string
voice Appliescommandtothevoiceapplication.
voice‐signaling Appliescommandtothevoicesignalingapplication.
guest‐voice Appliescommandtotheguestvoiceapplication.
guest‐voice‐signaling Appliescommandtotheguestvoicesignalingapplication.
softphone‐voice Appliescommandtothesoftphonevoiceapplication.
video‐conferencing Appliescommandtothevideoconferencingapplication.
streaming
‐video Appliescommandtothest reamingvideoapplication.
video‐signaling Appliescommandtothevideosignalingapplication.
state (Optional)Clearsthestateofadvertisingtheapplication
informationbeingconfiguredtodisabled.
tag (Optional)Clearsthetagvalueoftheapplicationbeingconfigured
tountagged.
vid (Optional)ClearstheVLANidentifierfortheport
tothedefault
valueof1.
cos (Optional)ClearstheLayer2prioritytobeusedfortheapplication
beingconfiguredtothedefaultvalueof0.(Avalueof0represents
useofthedefaultpriorityasdefinedinIEEE802.1D.)
dscp (Optional)ClearstheDSCPvaluetobeused
toprovideDiffserv
nodebehaviorfortheapplicationbeingconfiguredtothedefault
valueof0.(Avalueof0representsuseofthedefaultDSCPvalue
asdefinedinRFC2475.)
port‐string Specifiestheportorrangeofportstobeaffected.
To Next Page