Enterasys b5

clear spantree version
Enterasys B5 CLI Reference 9-9
clear spantree version
UsethiscommandtoresettheSpanningTreeversiontoMSTPmode.
Syntax
clear spantree version
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtoresettheSpanningTreeversion:
B5(su)->clear spantree version
show spantree bpdu-forwarding
Use this command to display the Spanning Tree BPDU forwarding mode.
Syntax
show spantree bpdu-forwarding
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐only.
Example
ThisexampleshowshowtodisplaytheSpanningTreeBPDUforwardingmode:
B5(su)->show spantree bpdu-forwarding
BPDU forwarding is disabled.