Enterasys b5

set macauthentication reauthentication
22-32 Authentication and Authorization Configuration
Mode
Switchcommand,read‐write.
Defaults
None.
Example
ThisexampleshowshowtoforcetheMACauthentication sessionforaddress00‐60‐97‐b5‐4c‐07
tore‐initialize:
B5(su)->set macauthentication macinitialize 00-60-97-b5-4c-07
set macauthentication reauthentication
UsethiscommandtoenableordisablereauthenticationofallcurrentlyauthenticatedMAC
addressesononeormoreports.
Syntax
set macauthentication reauthentication {enable | disable} port-string
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtoenableMACreauthenticationonge.4.1though5:
B5(su)->set macauthentication reauthentication enable ge.4.1-5
set macauthentication portreauthenticate
Usethiscommandtoforceanimmediatereauthenticationofthecurrentlyactivesessionsonone
ormoreMACauthenticationports.
Syntax
set macauthentication portreauthenticate port-string
enable|disable EnablesordisablesMACreauthentication.
port‐string Specifiesport(s)onwhichtoenableordisableMACreauthentication.Fora
detaileddescriptionofpossibleport‐stringvalues,referto“PortString
SyntaxUsedintheCLI”onpage 7‐1.