Enterasys b5

To Next Page

To Previous Page

clear policy profile

Enterasys B5 CLI Reference 11-5

Defaults

Ifoptionalparametersarenotspecified,nonewillbeapplied.

Mode

Switchcommand,read‐write.

Example

Thisexampleshowshowtocreateapolicyprofile1named“netadmin”withPVIDoverride

enabledforPVID10,and Class‐of‐ServiceoverrideenabledforCoS5.ThisprofilecanuseVLAN

10foruntaggedegress:

B5(su)->set policy profile 1 name netadmin pvid-status enable pvid 10 cos-status

enable cos 5 untagged-vlans 10

clear policy profile

Usethiscommandtodeleteapolicyprofileentry.

Syntax

clear policy profile profile-index

Parameters

Defaults

None.

Mode

Switchcommand,read‐write.

Example

Thisexampleshowshowtodeletepolicyprofile8:

B5(su)->clear policy profile 8

profile‐index Specifiestheindexnumberoftheprofileentrytobedeleted.Validvalues

are1to255.